Walter Surface Technologies Enduro-Flex™ 15R512 15-R Close Standard Density Coated Flap Disc, 5 in Dia Disc, 7/8 in Center Hole, 120 Grit, Fine Grade, Zirconia Alumina Abrasive, Type 27 Disc
752287
MFG #: 15R512
$24.06
/ EA
- Abrasive Material: Zirconia Alumina
- Backing Material: Plastic
- Center Hole Size: 7/8 in
- Center Hole Thread Size: 5/8-11
- Color: Orange
- Country of Origin: DE
- Disc Diameter: 5 in
- Disc Type: Type 27
- Grade: Fine
- Grit: 120
- Manufacturer Name: Walter Surface Technologies
- Maximum Speed: 12200 rpm
- Request For Quote: No
- Series: 15-R
- Type: Close Standard Density
The ENDURO-FLEX one step finishing discs not only meet but surpass the challenges that the metal fabricating and finishing industry faces on a daily basis. With the new ultra sharp and refined zirconium grain, the ENDURO-FLEX finishing disc will stay sharper for a longer period of time while removing more material faster. In addition, a special top coat continuously cools and lubricates the disc for smooth, vibration free grinding and sanding from start to finish. Moreover, there is no need to discard the disc when the flap overhang is worn down to the backing because the ENDURO-FLEX disc can be restored to like-new performance by reducing the diameter of the Eco-Trim™ backing.
- Application
- Item Features
- Standards
Grinding, Finishing Welds and Surface Finishing
- One step finishing solution to reduce cost
- Quiet, vibration-free grinding
- Raised hub fits all standard grinder back flanges
- Eco-Trim™ trimmable backing extends disc life by up to 3 times
- Safe and easy to trim
- http://youtu.be/w2Xc4KH6Z_A
ANSI B11.09-2010|OSHA 29 CFR 1910.1200|PROP65: This product can expose you to chemicals including Formaldehyde, which are known to the State of Calofornia to cause cancer-www.p65warnings.ca.gov|CSA Approved